If you’re planning on purchasing a tonneau cover for your truck, you have likely wondered, “can you use tire shine on tonneau”? With so many options available and not enough information, this question is one that arises often.
In this article, we’ll answer the question — can you use tire shine on tonneau? — and give further things you must consider.
Can You Use Tire Shine On Tonneau?
According to CoverBeta, “Without mincing words, I would say you can use tire shine on them of course, but you really shouldn’t. Tire shine is not recommended because, first of all, they are not easily absorbed by the vinyl fabric of truck covers.
This allows them to stick to the surface of the tonneau thereby attracting dust and other particles which will settle on it and give it a repulsive appearance, and additionally make it become weakened through an increased rate of degradation.”
- TruXedo TruXport Soft Roll Up Truck Bed Tonneau Cover
- BAK BAKFlip MX4 Hard Folding Truck Bed Tonneau Cover
What Can I Use To Shine My Tonneau Cover?
If it is a soft vinyl cover, yes. If it is a hard (plastic) cover, no. If you are going to use something on a tonneau cover, use a soft clean cloth with water and mild soap, but do not spray water or cleaner on the cover. Just wipe the surface to get any dirt off first, then use another soft clean cloth dampened with plain water to remove any residue from the soap.
Also, you can use 303 Aerospace Protectant on your tonneau cover, and it should provide a good shine. Please keep in mind, however, that 303 is not intended to be used as a polish or wax. As such, you will not get the same shine with 303 that you would with wax or polish.
There’s Shine ARMOR Wax or CAR GUYS Hybrid Wax for your tonneau cover. Both of these products are made to provide a high-gloss shine on painted surfaces only. They cannot be used on clear plastic windows or vinyl covers because they contain cleaners and/or solvents that could damage those surfaces.
Can You Use Tire Shine On Vinyl?
It probably won’t hurt the vinyl, but it won’t do anything else to help protect it. The reason it is not recommended is because it will make the vinyl slippery. If you drive on unpaved roads a lot, tire shine could cause your tonneau cover to slip off.
If you are looking for something to protect your vinyl tonneau cover with a shine, we would recommend 303 Aerospace Protectant. It will give the vinyl a nice gloss and protect it from UV rays.
Tire shine is a product used to make tires look shiny and new. This gives a car a more attractive appearance, and it can add to the value of the vehicle. Tire shine is available in a variety of different forms and it may come with or without added scents.
The original tire shine formulas were generally oil-based products that contained lots of solvents, so they were not suitable for use on vinyl or rubber products. In some cases, these products can be used on vinyl tonneau covers, but people should read the labels carefully to be sure that they do not contain any oils or solvents that could damage the cover.
How Long Does It Take Tire Shine To Dry?
Certain products are much quicker than others; some are even instant (although these products tend to be low quality). Spray-on tire shines can be very quick, but if you’re looking for maximum gloss with minimal effort, you might want to invest in a gel or foam product.
If you apply too much tire shine at once, it will take longer to dry. You should only need a small amount on each tire (usually just a light mist or one squirt of liquid).
The temperature outside. Tire shine needs heat in order to cure, so the warmer it is outside, the faster your tires will fully dry.
How Do I Make My Tonneau Cover Look New?
With a few simple steps, you can make your tonneau cover look like new again:
Step 1: Clean The Tonneau
Remove loose debris and accumulated dirt from the top of the tonneau cover and the truck bed with a stiff bristle brush or broom. Then wash the tonneau with warm water and mild dish soap, or automotive cleaning supplies.
Step 2: Rinse
Rinse thoroughly, making sure any residue from the soap is gone. Afterward, allow it to air dry completely.
Step 3: Apply Paint Sealant
This will protect the surface of your tonneau cover and keep it looking new for a long time to come.
What Factors Determine A Good Tonneau Cover Cleaner?
The first factor you need to consider before shopping for tonneau cover cleaners is the material. This is because there are different types of tonneau covers available in the market. Some of the common materials include fiberglass, aluminum, vinyl and soft cloth. Each of these materials has its own specific cleaner. If you’re not sure what material your cover is made from, you can contact your manufacturer to get more information.
Next, check the instructions that come with your truck’s tonneau cover since it may come with specific instructions on how to clean it. Most manufacturers also recommend using a mild soap and water mixture for cleaning the cover. Remember that using a harsh cleaner will only damage your truck’s paint job.
How Do You Use To Clean The Stock Tonneau Cover?
There are a number of cover cleaners available, and they can be used to clean the exterior. It’s important that you use a cleaner that is formulated for vinyl or fabric, as other cleaners may contain abrasives that could scratch the cover.
When cleaning your cover, always start by using a soft bristle brush to remove any loose dirt. After brushing, go over the cover with a damp sponge or cloth to wipe away any remaining dirt and grime. Once cleaned, rinse the cover with fresh water and allow to air dry.
How Do You Seal A Tonneau Cover?
Tonneau covers are usually equipped with seals that close against a lip on the body of the vehicle to prevent water from entering it. If these seals become worn out or damaged, you will need to replace them in order to keep your cargo protected from moisture and dust.
Many people like the look of their vehicle with a tonneau cover installed, but they do not want to spend the money on a retractable cover. A soft roll-up or folding tonneau cover is an affordable option, but many people wonder how to secure it when it is rolled back. The good news is that there are several options for securing a truck bed cover.
Tonneau Cover Clamps
One of the most popular options for securing a tonneau cover is clamps. These are easy to install and don’t require any additional tools. They can be used on either side of the truck, depending on where you have your tailgate open. One clamp is used on each side of the truck bed and then connects underneath the rails on your tonneau cover. This will hold it in place, even if you are using your truck bed for extra cargo space by having your tailgate down.
Tonneau Cover Strap
Another option that works well to secure your tonneau cover is a strap. These are typically sold in packs of two so you can use one on either side of your truck bed. The straps simply hook around either side of the tailgate and then they connect underneath the rails on your tonneau cover.
How Much Does It Cost To Shine Tonneau Covers?
The cost of shining a tonneau cover varies depending on whether you choose the do-it-yourself option or hire a professional to do it for you. The cost also depends on the type of tonneau cover you have and where you get it done.
It costs just a couple of dollars for you to do the cleaning yourself.
Can You Use 303 Protectant On A Tonneau Cover?
You can use 303 Aerospace protectant on a tonneau cover. 303 is known to be one of the strongest UV protectants on the market. It will help keep your cover looking new by resisting fading and cracking.
Just remember that tonneau covers are made with different materials and the first thing you want to do is test the product in an inconspicuous area before you spray the whole cover. If no harm comes to the test area, then spray away.
Can You Use Tire Shine On Tonneau – Conclusion
The bottom line is, if you want to get the most out of your truck bed cover you need to clean and/or wax it periodically. Research shows that about 80% of people who use tonneau covers clean it either monthly or when it needs it. If you don’t maintain your cover properly then the dirt will eventually build up increasing the chances of scratches or damage in the long run.
Thanks for reading.
Joe lives and breathes cars and trucks. After many years working in the Auto industry, he decided that it is only right to share his knowledge with the public. As a qualified expert in trucks and cars, he started working for Truckile.com and is the main editor and publisher.