In the country, USA, the pickup trucks are listed as one of the famous vehicles — and every single year that passes, millions of these trucks are sold out. If you recently purchased a truck, it’s imperative that you put adding a liner into consideration.
Do this, if the bed doesn’t come with a liner. You know what happens when one gets exposed to mosquitoes, right? It increases the likelihood of the person having malaria. That’s exactly what it is as regards the bed of your truck: as long as it’s exposed to the elements, it retains the risk of getting damaged.
In this article, we want to look at answering the question, “Does Spray-On Bedliner Stick To Plastic?”
Does Spray-On Bedliner Stick To Plastic?
It’s a big “YES” to this question, “Does Spray-On Bedliner Stick To Plastic?” Before spraying, ensure you don’t skip the part where you have to sand it, clean it, then spray on plastic adhesion promoter then bedline.
Things To Know About Spray-On Bedliner
The use of a truck Bedliner is to help keep the inner of the truck’s bed away from damage or risk. A good Bedliner has the ability to create a surface that resists the cargo from falling off. People have categorized this type of Bedliner, spray on Bedliner, as the popular category of truck Bedliner. You must know how to apply the possible ways to protect the bed of your truck because, among other parts of the truck, it’s the most abused part — a part designed to take in almost anything.
This type of bedliner works efficiently and effectively. It evenly adheres to the bed of your truck. To disclose further, it serves as a protective layer that bonds excellently with paint and metal. You can place it permanently at the bed of your truck because it doesn’t in any way cause any damage to your truck. Again, to ensure maximum protection, it’s advised you go for a spray-on Bedliner. If you want to minimize the money you spend on purchasing and applying spray-on Bedliner, you can simply do it yourself.
We have compiled a few steps that you can follow to successfully apply this Bedliner — spray-on Bedliner.
1. Remove Accessories And Wash
Before you go ahead to apply the Bedliner, make sure you remove the accessories and tailgate from your truck. After you’ve removed the accessories, sweep or vacuum the debris and dirt from the bed of your truck. Don’t fail to clear all the holes and drains.
Use TSP and water to scrub both the bed and tailgate. Doing this helps you to get rid of oil, petroleum and wax-base residue. While carrying out these processes, you might want to use chemical removers and scrapers to wash it. Now, to clean it, there are a few things you can use, they include:
- User Wiper
- A Clean Rag
After washing properly, allow it for some time to dry.
2. Mask Off All The Areas
Employ the use of a painter’s tape to mask off those areas you want to leave uncovered. You can find these areas either near the tailgate or at the back of the bed. For you to form a seal — a protective seal precisely — press the painter’s tape down in a firm manner. You know, you will definitely see drain holes; seal the holes neatly using tape.
3. Scrub Painted Surfaces
It’s recommended that you scuff the painted surfaces. Want to know why? Well, it greatly helps to make a perfect bond. Figure out those glossy areas and work towards scuffing them. There are several stores you can find sandpapers; get sandpapers and use them to sand rust areas. Afterwards, use the sandpaper to create a texture — a suitable texture for a Bedliner. The next step is to get rid of sanding dust.
How can you do this?
Blow and wipe down the bed.
4. Clean Out The Debris
When you go through the process of sanding the surface, a few debris and paint chips find a way of staying behind. To remove this debris and others, vacuum out every surface — this would help you remove other paint chips, too. If you hesitate to remove the debris, dirt and the rest, you stand the risk of seeing bubbles in the future.
You can apply a rust converter or a primer coat on bare or uncovered areas and allow it to dry for a couple of minutes. At this point, you can get acetone to wipe the bed area. Get a spray bottle and go straight to the bed front to start. After using the acetone, allow it to sit for some minutes. Take a towel and wipe it. As you wipe the surfaces, make sure you do it carefully as this is where the material is applied. The surface can dry for just a few minutes, so it’s recommended that you leave it for just some minutes.
Tip: Make sure you don’t forget to put on chemical resistant gloves and a resistant.
At this stage, it’s important that you mix all materials with the assistance of a paint mixer and power drill. Don’t fail to stir this material before you go ahead to apply. After you’re done stirring, start applying it to seems and corners. If you need a mixture that’s thinner than normal, mix something called xylene in it.
The moment you finish with the corners and seams, you can make use of a handle and roller cover to apply around other areas. If you’ve gotten to this point, this is where you have to apply the mixture to the side and front panels. After that, start rolling the mixture either at the tailgate or on the backside. Having done all of that, you can now cover the bed’s floor. This will serve as the first coat of the material.
In addition, considering the fact that you’ve applied the first coat of material, it’s time to apply the second coat of mixture on the tapped edges. Don’t do this when the first coating hasn’t dried. If you do this after the first coat has dried, the tape has a high possibility of tearing while you’re removing it. Again, if you discover that there’s a missing area, you can pick up a small brush and touch it up. Once there’s no longer any need for the roller cover, make sure you discard it that instance. At this time, you can use a plastic bag to wrap the brush.
Lastly, at some point, you might want to remove the excess mixture. To do that, you need xylene. It has to be in its wet state before you use it. It may take you like 5-6 hours in setting up the first coat. That minute you get done with setting up the first coat, go ahead and apply the second coat.
Follow The Instructions
When you purchase any DIY spray-on Bedliner, you’d see a manual that contains instructions on how to use. In order to be in the know of what to do, make sure you carefully study the instructions given by the manufacturers. Applying this Bedliner is not as difficult as you think it is. In other words, it’s quite simple to apply. Doing it yourself helps you to save money and time, too.
Furthermore, go through the instructions and you’d discover how much you don’t need to hire any professional to handle the process of using the Bedliner.
Below are the necessary materials and tools needed during the process of installing Bedliner:
- Paint roller
- Safety glasses
- Masking tape
- Plastic bags
You can give the bed of your truck reliable protection by using a quality Bedliner. You just have to take your time and learn the process involved. If you follow the step-by-step guide listed above, you’ll surely do it yourself successfully.
Frequently Asked Questions (FAQs)
Should I Remove Plastic Bedliner?
You need to know that there’s a huge possibility that you’d find a couple of scratches beneath that liner. This is why most truck enthusiasts recommend that truck owners don’t (NEVER) install plastic Bedliners. The moment you take out the liner, you might see a few areas where you’d need to repair before doing anything else.
Are Spray-on Bedliners Worth It?
Looking at the protection it offers the bed of your truck, the spray-on Bedliner is very much worth it. And, you don’t get to spend so much money; it’s quite affordable. We won’t forget to add that these Bedliners last for very long. What does this mean? It means you’d enjoy its value for a very long time.
Do Plastic Bedliners Cause Rust?
Plastic Bedliners can, over time, allow moisture to find its way under the liner hence causing rust.
Does Spray-On Bedliner Stick To Plastic – Conclusion
In this article, we were able to answer the question, “Does Spray-On Bedliner Stick To Plastic?”
What answer did we give? It’s a big yes. Spray-on Bedliner has what it takes to stick to plastic. After giving an answer to that question, we went on to touch the area, “how you can apply this Bedliner.”
Thanks for reading.
Joe lives and breathes cars and trucks. After many years working in the Auto industry, he decided that it is only right to share his knowledge with the public. As a qualified expert in trucks and cars, he started working for Truckile.com and is the main editor and publisher.