How Do I Remove A Weathertech Bug Deflector?
When they’re new, Weathertech’s bug deflectors look great on your vehicle. But after time, they can start to look a little worn. And although they work well when you first use them, sometimes it’s hard to remember how to remove them.
This can be frustrating especially if you needed to take your windshield wiper blades off and haven’t put them back on since WeatherTech installed the deflector.
If you find yourself sitting there trying to figure out how to remove a Weathertech bug deflector from your windshield, then look no further because today we’re going to walk you through how it is done.
Having said that, let’s look at answering the question — How Do I Remove A Weathertech Bug Deflector?
How Do I Remove A Weathertech Bug Deflector?
It is possible to remove the Weathertech Bug Detector without damaging the vehicle. Simply grab a hold of the deflector on either side and gently pull it off the hood.
The adhesive will rip away from the deflector and stay on the car, making for an easy install when you replace it with a new one.
- Black Tinted Side Window Vent Visor Deflectors Rain Guards for Toyota
- Voron Glass in-Channel Extra Durable Rain Guards for Trucks
What Is A Bug Deflector?
A bug deflector is an accessory that helps to protect the hood and windshield of your vehicle from nicks, scratches, chips, and damage caused by flying stones and debris. They are also known as wind deflectors or stone guards.
The most common type of bug deflector is a “hood guard” or “hood shield” which attaches to the front of the hood. These are typically made from ABS plastic or acrylic, and often come with a 3-year warranty. They come in different shapes and designs: some have a curved edge to follow the contour of the hood, while others are more squared-off but can have a portion that curves upward over the windshield.
Sometimes they have an aerodynamic design that helps to channel air around the vehicle. Some types have a smoke finish, while others have chrome trim.
A less common style of bug deflector is one which mounts to the top of the windshield instead of on the hood. This type is designed to block bugs before they hit your windshield, helping you avoid having to clean them off when you stop for gas.
Tips On How To Remove A Weathertech Bug Deflector
The deflectors are made from aerospace-grade acrylic and come in two styles: the original style and the more modern Avs style. The company says it designs its deflectors to be durable and long-lasting, but you might need to remove them at some point for cleaning or replacement.
Before You Remove the Deflector
If you’re removing your deflector because it’s damaged, check with WeatherTech first to see if there’s a warranty on it. It may have been damaged during shipping or installation, which would make it eligible for replacement.
If you’re just having trouble getting it off or want to clean or reseal it, read through these instructions first so you know what to expect before you get started.
To remove a bug deflector:
- Clean the area where the bug deflector will be placed with a glass cleaner or alcohol-based cleaner.
- Wipe with a dry cloth to remove any residue from the cleaning solution.
- Peel back the clear protective tape from the adhesive backing on the bug deflector very slowly at an angle (10 to 15 degrees or less) to avoid removing the adhesive backing.
- When ready, hold both sides of the bug deflector and carefully place it on top of the hood above the windshield opening at a 10 to 15 degree angle and apply even pressure while pressing down on each side of the deflector at once.
This durable 3/16″-thick bug deflector will protect the hood, windshield, and fenders of your vehicle. Installation is easy and takes less than one minute. The deflector mounts to the upper lip of the hood with a high-quality automotive-grade adhesive tape, which is included with each deflector.
Another Approach For Removal
With the right tools, removing your WeatherTech Bug Deflector is a quick and easy process. All you need is a Phillips head screwdriver, 10mm socket, 4mm Allen wrench, and ratchet. Start by opening the hood of your vehicle.
Find the clips along the top of the deflector and remove them using the screwdriver. There are also two clips underneath on each side that should be removed using the same method. Once all four clips have been removed, you can lift up on the deflector to detach it from its hooks at either end of the hood.
How Do You Clean A bug Deflector?
Before cleaning your bug deflector, make sure it is secure to the hood. Open the hood and look for the four screws that secure it to the hood. If they are loose, tighten them with a screwdriver.
- Use an automotive soap and sponge to wash the bug deflector. Wash your car as you normally would and then clean the bug deflector with a separate sponge.
- To get into the grooves of the bug deflector, use a small paintbrush. Brush any debris out of the grooves.
- Apply wax to the bug deflector after you have cleaned it well. Make sure that you apply wax in thin layers only, as too much wax can damage your vehicle’s finish.
- Dry your car completely after you have applied wax to it, including the bug deflector. You may need to use a clean cloth or towel for this task.
Is A Bug Deflector Worth It?
You may be wondering if a bug deflector is worth it. The answer will depend on what you’re looking for in an accessory. Solid metal bug guards are great for off-roading vehicles because they offer protection without adding extra weight or obstructing the driver.
Read Also: Do Running Boards Prevent Door Dings?
Bug deflectors come in many different shapes and sizes. The most common type is a clear plastic strip that extends over the hood of your car or truck. Some bug deflectors have cut-outs for headlights and air intakes, while others have holes drilled into them to accommodate accessories such as wiper blades or grille inserts. Other styles include solid metal bug guards and mesh bug guards that fit into existing grilles (such as the one pictured above).
In addition, they can even help improve the aerodynamics of your vehicle, which can save on fuel costs. They also give your ride a more rugged look without having to lift it or add any bulky equipment.
Do Bug Deflectors Help With Rock Chips?
When a rock hits your windshield, it’s usually not a direct hit. Most of the time, the rock will bounce off your hood or windshield and fly up into the air with enough force to potentially damage something else.
Bug deflectors help prevent this secondary impact by directing rocks away from the rest of your vehicle when they hit your car’s hood. So yes, bug deflectors do help prevent rock chips, but only in certain circumstances.
What Is The Point Of A Hood Deflector?
Hood deflectors do not usually block the entire hood, but allow air to flow through them. The basic purpose of this is to protect the hood and windshield from bugs and other debris that might fly into your path while driving. They are made of hard acrylic plastic (depending on the model), which can withstand most hits.
Another advantage of a hood deflector is that it allows you to crack the windows open when it’s raining or snowing out, letting some fresh air in without getting the inside of your vehicle wet.
There are many different styles and colors to choose from so you can get one that matches your particular vehicle as well as your personality. This can be especially useful in the winter when sand and salt are applied to icy roads.
Hoods deflectors will also reduce the noise created by air turbulence, which is a plus if you have a noisy engine. Many deflectors also come with decorative lights or mesh screens that may add to their aesthetic appeal in the eyes of some drivers.
Types Of Hood Deflector
There are two main types of hood deflectors:
Fixed: This type is permanently attached to a vehicle’s hood or hatchback.
Removable: This style is typically mounted on the hood via suction cups and can be removed when not in use.
Do Window Deflectors Work?
There are two types of window deflectors, rain guards and window visors. Rain guards are installed on the outside of your vehicle’s windows and prevent rain from getting in through the door opening. Window visors go inside your door frame and prevent wind from blowing into your vehicle through the same opening
The main benefit of installing window deflectors on your vehicle is to improve cabin comfort. If you love driving with your windows open, you’ll appreciate not having to deal with wind noise or turbulence. Rain guards also help keep water out when you’re parked, so that you don’t have to worry about wetting your interior when it rains.
How Do I Remove A Weathertech Bug Deflector – Conclusion
So there you have it; the answer to the question: How do I remove a Weathertech bug deflector? It takes one person a couple of minutes to install or remove the deflector.
Thanks for reading.
Joe lives and breathes cars and trucks. After many years working in the Auto industry, he decided that it is only right to share his knowledge with the public. As a qualified expert in trucks and cars, he started working for Truckile.com and is the main editor and publisher.