Does The 2016 Ford F-150 XLT Have Remote Start?

The 2016 Ford F-150 XLT is equipped with remote start and is available with four-wheel drive. 

The remote start feature allows you to unlock your vehicle remotely from up to 250 feet away. 

If you have an F-150 with four-wheel drive, you can select a four-wheel drive mode from the driver’s seat, making it easier to get out of a snow bank or into a driveway.

How to Identify If Ford F-150 XLT Has a Remote Start?

Most of the new cars have more electronic features and are high-tech.

The device can help locate your car in the parking lot, start a vehicle remotely, or even lock and unlock doors.

It’s possible that the owners don’t know about the many features of the F 150 XLT. This article helps you to identify if your car has a remote start or not.

Check The Owner’s Manual

The manual for the remote starter in your car will give you information on how to use it. To find out if the feature is present, you need to check the manual.

Check Your Vehicle’s Key Fob

If the remote start is present, there will be a button on the key fob. An arrow that makes a partial circle is a remote start symbol. After hitting the lock button, the owner presses the remote-start button.

Test Out The Remote Start

Instructions on how various systems work in the vehicle should be contained in your owner’s manual.

If you double-click the electrical-control start button, you will be able to start the car.

How Can I Activate Remote Start On Ford F150 XLT?

Press the lock button to lock all vehicles. The remote start switch can be keyed twice. The exterior lamps blink. The horn will sound if the system doesn’t start.

The quiet start will cause the blower fan to run at a slower rate. Depending on the information displayed, you can either enable or disable remote start.

What Does Ford F150 XLT Remote Start Do?

• Press the lock button and the remote start button twice to start your vehicle.
• To turn off the vehicle, press the 2X button twice. The headlights shut off with the engine.
• When remote start is active, it will adjust the seating, mirrors, and steering column according to your preset positions.
• If you give status feedback with an equipped model, the remote-control feedback will let you know the status of the remote start or stop commands.
• Green: Remote start successful.
• Red: remote stops. The vehicle is off.
• Blinking red: Remote stop or start failed.
• Blinking green: Awaiting status update.

Benefits

• Wait for the heat to kick in and warm your car while you’re in the house.
• It is possible to melt snow and ice remotely with the help of the defroster.
• In hot summers, it cranks the air conditioner to make your car cooler before you get in.
• Locating your car in a crowded lot will keep you from wandering around.
• Improved tech and car alarms have increased vehicle security.
• If you have given someone your car’s movements can be monitored on the phone and you can quickly locate it on the phone.

Why Is My Remote Not Working?

• Ignition is on
• Alarm is active
• Disable remote start or stop
• The Hood is open.
• The transmission is not set to park mode.
• The vehicle’s battery is low.
• The service engine light is on in the instrument cluster.

How To Reset My Ford Remote Start?

Try the following procedures:

• The remote should be turned off and on again.
• The remote cover needs to be removed to get rid of the battery.
• Wait for 15 seconds.
• Remove the cover and put the battery back in. Check if it will work.
• Check the battery.
• If you have another battery, replace it.
• Check to see if the remote starts to work.
• Resetting your remote start.
• Close all doors while you are in the driver’s seat, and take all your car’s remote-start keys.
• Push the start button once, without moving the brake pedal, if you want to use the accessory or on/right position.
• Hold on to the remote car starter for a second after pressing the lock switch.
• The vehicle’s lights should be off when you turn your key in the “Off” direction. In five seconds, turn the key to the On position, don’t remove it when you switch it off.
• You have to repeat the on-off cycle three or four more times.
• When you turn the key to the “On” position on the fourth cycle, the locks should make a loud noise.
• If you have more than one remote car starter, press and hold the lock dial on the key in the ignition and any additional remote car starter. If you want to go to the “on” mode for the fourth time, you need to turn the key to the “Off” setting within ten seconds.
• Get out of the car and shut the door by removing the key from the ignition.
• It’s possible to repeat the procedure if the remote car starter fails. Try troubleshooting if it continues.

Troubleshooting Guide

Make sure you follow the procedure for remote starting before you try to fix it. The causes and solutions of various issues face the remote start.

Method 1

The Lock and Unlock buttons are the same as before, but pressing Start doesn’t produce a response from the vehicle.

When the remote is in a purse or pocket, it is possible for someone to accidentally push the controls.

When you disconnect the vehicle during service, many remote car starters will switch to valet mode.

To enter and exit valet mode, you need to check on the back of the remote for the right buttons. The parking lights should blink two times when you press the keys.

Method 2

Pressing Start causes several flashes of the parking lights, but the vehicle won’t start if equipped.

The remote doesn’t work because of the broken or corroded hood pin switch. The hood switch needs to be replaced at the mobile electric store.

Method 3

Your vehicle will not respond even if you press a button on your remote control.

When a vehicle’s battery is dead or disconnected for service, it’s a rare occurrence, because many remotes are higher-end but if it does, call your technician to help you program it.

Method 4

It happens when you accidentally press a bunch of buttons, which causes the second car model.

When your vehicle does not respond after pressing a button, you will note it. You can check your owner’s manual or call your installer for directions.

Conclusion

If you want to learn the latest upgraded remotes, make sure you check your owner’s manual.

It is a good idea to understand the simple techniques of resetting, using the remote start, and malfunctioning, as explained in this article.

You can be saved from being stranded alone on the road with some of these tricks.